TC-10/20 temperature controller
The TC-10 and TC-20 temperature controllers from npi electronic are low-noise linear controllers designed for heating only.
They ensure optimum thermal stability in sensitive experiments such as electrophysiology or imaging. Their analogue control avoids switching artefacts and guarantees silent, reliable control.
The TC-10 manages a single channel, while the TC-20 can manage two independent heating channels.
Features of the TC-10/20 Temperature Controller
- Silent linear control (no switching artefacts)
- Heating only, suitable for resistive loads
- Available models: TC-10 (1 channel), TC-20 (2 channels)
- 2252 Ω thermistor sensors at 25 °C
- 3½-digit digital display for output temperature or voltage
- Adjustable PI controller with gain and integration
- Built-in safety: automatic shutdown in the event of a disconnected or short-circuited sensor
- Short-circuit protection and electronic current limiting
- External input (BNC) available for external control (1 mV/°C)
Technical characteristics of the TC-10/20 temperature controller
Caractéristique | Valeur |
---|---|
Type | Linear temperature controller, heating only |
Channels | TC-10: 1 channel / TC-20: 2 channels |
Internal sensors | Thermistors 2252 Ω at 25 °C |
External input | 1 mV/°C via BNC |
Control temperature range | 0 to 60°C (safety limit) |
Maximum output voltage | ~12 V DC |
Maximum current | ~1 A per channel |
Protection | Short-circuit protection, current limiting |
PID setting | Gain (10 to ∞), integration (50 ms to 20 s) |
Display | 3½ digits, temperature (°C) or output voltage (V) |
Operating modes | SENSOR A, SENSOR B, DIRECT, EXT |
Power supply | 115 / 230 V AC, 50/60 Hz |
Applications
- Maintaining the temperature of electrophysiology recording chambers
- Heating tanks, perfusion tubes or resistive devices
- Thermal stabilisation for cell cultures and living tissue
- Microscopic applications requiring low electronic noise
- Optical experiments sensitive to thermal stability
Produits similaires
-
The MTC-20/2SD is a linear temperature controller, designed for heating only, particularly suited to electrophysiology and imaging applications.
-
PTC-10 npi electronic, single-channel temperature controller for heating and cooling, precise, low-noise, with PI controller and Peltier outputs up to ±15 V / 5 A.
-
PTC-20 npi electronic, 2-channel temperature controller for heating and cooling, accurate, independent, with PI controller and Peltier outputs up to ±12 V / 3 A per channel.